Jeep Gladiator Accessories
Exterior Accessories
Cargo Box Heavy Duty Floor Liner
This heavy duty rubber liner is 6mm thick and custom cut to protector the floor of the cargo box. The liner also has a checker plate pattern that not only protects, but coupled with its sticky rubber compound helps reduce cargo movement.
PART #: LA000037AA
LED Light Bar - Steel Bumper
The LED light bar mounts directly to the vehicles steel bumper and integrates into the vehicle auxilary switches on the dash. No stress night drives with over 10,000 lumen light output with a combination beam pattern (mix of spread and pencil beam).
LED Light Bar - Suits Rubicon - Requires Steel bumper (MC6) & Lifestyle Adventure Group (ADH)
PART #: LA000038AA
Side Window Air Deflectors
Allow fresh air into the cabin and help prevent water from entering your vehicle when driving in wet conditions.
PART #: 82215368AB
Front Air Deflector
Protect your bonnet from stone chips and road debris.
PART #: 82215367AB
Wheel Lock Kit
Don't be left on blocks! Kit includes four chrome wheel locks and lock key.
PART #: 82212564
Tyre Valve Stem Caps
Stylish valve caps to keep the dust out. Also available in Black. Set of 4
PART #: 82213628AB
Tyre Valve Stem Caps
Stylish valve caps to keep the dust out. Also available in Satin Chrome. Set of 4
PART #: 82214622
Wheel Jack Base
An essential for your car to replace a flat tire in emergency situations.
PART #: 82215637AB
Bodyside Decal
Left And Right Bodyside Stripe with Gladiator Hood Side Decal
PART #: 82215958AC
Bodyside Decal
Make your Gladiator unique with a matte black army star.
PART #: 82215598
Bodyside Decal
Stand out from the crowd with matte black hexagonal graphics.
PART #: 82215597
Bonnet Decal
Featuring multi-Jeep grille design. Graphic is low gloss black, vinyl material that is a wet adhesive application. Fits Rubicon bonnet.
PART #: 82215376
Bonnet Decal
Enhance the look of your bonnet with a classic American flag
PART #: 82215936
Bonnet Decal
A classic 1941 decal bonnet decal.
PART #: 82215937
Bonnet Cover
Cover your bonnet to protect it from stone chips and road debris.
PART #: 82215369
Windshield Tie-Down Straps
Enjoy the feel of fresh air with Tie-Down Straps to secure your windshield to the bonnet.
PART #: 82215717
Bonnet Latch - Chrome
Revamp your bonnet latches to chrome featuring a classic Jeep decal.
PART #: 82215710
Front End Cover
Cover your front end to protect it from stone chips and road debris.
PART #: 82215365AB
Indoor Full Vehicle Cover
Protect your asset. Cover your truck for storage and prevent dust buildup.
PART #: 82216116
Outdoor Cab-Only Cover
Protect your asset, this cover will protect your cab from harmful UV and prolong the interior and exterior.
PART #: 82215600
Front Grille - Black
Style up your front end with these Black Front Grilles. Other accessories pictured sold separately and may not be available in Australia.
PART #: 82216097
Jeep Performance Parts (JPP) Badge
Style your Gladiator with a Jeep Performance Parts (JPP) Badge
PART #: 82215764
Steel Front Bumper & Skid Plate Package
Nothing is stronger, more durable and off road capable than the Mopar Steel bumper package. With its twin recovery hooks and winch capability (additional hardware required) this is a serious piece of kit. The package also includes a steel bash plate that mounts underneath the steel bumper for greater off-road protection. The package also includes fog lamps, however front park sensors are not carried into the steel bumper package (it's steel!).
Compatible with all JT Gladiator models.
Package Includes: Steel bumper (P/N: 82215121AH), Steel bash plate (P/N: 82215183AB), Closeout panel (6BU43RXFAC), Licence plate bracket (P/N: 68295977AA) and Patch Harness (AUSHARNSTEELBUMP).
PART #: 82215121AH
Interior Accessories
All-Weather Rubber Floor Mats
LHD mats shown for illustration purposes only.
PART #: 82216629AA
Grab Handles - Front
Off road essential: For passenger and driver to get hold of for easier entry or exit. Also handy to stablising yourself on the roughest of roads.
PART #: 82215523AC
Grab Handles - Rear
Off road essential: For passenger to get hold of for easier entry or exit. Also handy to stablising yourself on the roughest of roads.
PART #: 82215524AC
Door Sill Guards
Protect your door sills from scuffs. Also available in Stainless Steel
PART #: 82215551
Door Sill Guards
Protect your door sills from scuffs. Also available in Black Plastic
PART #: 82215552AC
Jeep Windscreen Sunshade
Protect your interior from the harsh Australian sun and keeps your truck cooler than it already is. Folds away easily for storage.
PART #: 82203133AB
Lifestyle Accessories
Sunrider
Get ready to "Grab Summer" in style with the Jeep Sunrider, where the road meets the sky, and adventure knows no limits. Embrace the open air and discover a new level of connection with the world around you.
Remove your freedom panels, stow them and run with Sunrider. Be in the wilderness in seconds.
PART #: 82216370AB
Sun Bonnet Soft Top - Mesh
Provide some head protection with the ability to attain the open-air feel during summer time.
PART #: 82215621
Sun Bonnet Soft Top - Solid
Caught in a rain shower? Get the soft top up. Also provides head protection from the sun with the ability to attain the open-air feel during summer time.
PART #: 82215620
Hard Top Kit - Black, textured
Prevent wind and road noises with well-insulated material for colder weather with black textured.
PART #: 82215613
Hard Top Kit - Primed/Raw (Ready to paint)
Prevent wind and road noises with well-insulated material for colder weather. Ready for a custom paint job.
PART #: 82215612
Soft Top Kit
Providing protection from the elements in all conditions.
PART #: 82215614
Performance Accessories
Grille & Winch Guard
Protect the front end of your Gladiator with a Grille & Winch Guard.
PART #: 82215351
Light Mounting Brackets (mounts to A-Pillar)
For mounting lights to Windshield/A-Pillar.
PART #: 82215427AB
Bumper-Mount Light Brackets
Bracket only. Compatible with production and Rubicon bumpers. Lights shown for illustration purposes and are not included.
PART #: 82215428
Light Mounting Brackets
Price is for bracket only. Mounts to Grille & Winch Guard (82215351) which is required and sold separately. LED lights depicted for illustration purposes only and not included.
PART #: 82215729
Front Skid Plate
Same as production Rubicon Skid Plate. Vehicle must also be fitted with Skid Plate Bridge Bracket (82215949), which can be purchased separately.
PART #: 82215183AB
Storage Accessories
Electric RollTrac Tonneau Cover
The ultimate in security and premium water management on a truck, the RollTrac package offers:
• Electronic open / close with buttons at both rear corners of the tonneau cover.
• Anti - pinch/jam fingers feature on the roll cover.
• A unique lockable stowage box at the front of the RollTrac unit.
• Lockable tailgate operation independent of RollTrac position.
Prerequisite: Vehicle requires factory production option "ADH" or Accessory Trail Rails System installed.
PART #: LA000028AA
Sports Bar for RollTrac
A stunning black powder coated sports bar that secures to the RollTrac tonneau cover side rails. The 3 inch tubing really sets the vehicle off.
Prerequisite: Vehicle requires factory production option ADH or Accessory Trail Rails System installed.
Note: RollTrac Tonneau cover sold separately (Part Number: LA000028AA).
PART #: LA000032AA
Soft Tonneau Cover
A soft tonneau cover that is compatible with the Sports Bar, this tried and tested locally developed Australian product has excellent water management built into the design along with a flexible bungee retention system for covering bulky loads. When not required, the cover is easy to remove an stow.
Prerequisite: Vehicle requires factory production option ADH or Accessory Trail Rails System installed.
Note: The sports bar is sold separately under part number LA000035AA.
PART #: LA000034AA
Sports Bar
A stunning black powder coated sports bar that secures to the vehicles cargo box and is compatible with the genuine soft tonneau cover. The 3 inch tubing really sets the vehicle off.
Prerequisite: Vehicle requires factory production option ADH or Accessory Trail Rails System installed.
Note: Soft Tonneau Cover (Sports bar compatible) is sold separately (Part Number: LA000034AA).
PART #: LA000035AA
Soft Tonneau Cover
A tried and tested locally developed Australian product, the soft tonneau cover has excellent water management built into the design along with a flexible bungee retention system for covering bulky loads. When not required, the cover is easy to remove an stow.
Prerequisite: Vehicle requires factory production option ADH or Accessory Trail Rails System installed.
PART #: LA000033AA
Roof Rack Kit
Provide a carrying solution for outdoor equipment. Only for hard top fitted vehicles. Carry capacity of 45kg.
PART #: 82215387AB
Cargo Bed Cross Rails Kit
For use with factory-optioned or Mopar-fitted Trail Rail System (82215956).
PART #: 82215631
Collapsible Cargo Tote
Store your items neatly and prevent items from rolling around when driving. Merchandise not included.
PART #: 82208566
Thule Canyon 859
Mounts to the available Roof Rack Kit, sold separately.
PART #: TCCAN859
Rooftop Basket Cargo Net
For use with Thule Canyon 859 Roof Top Basket, sold separately.
PART #: 82209422AB
Thule Force 624
Mounts to the available Roof Rack Kit, sold separately. Dimensions: 165cm x 87cm x 40cm
PART #: TCBOX624
Thule 92725
For 6 skis / 4 snowboards. Mounts to the available Roof Rack Kit, sold separately.
PART #: TCS92725
Thule Circuit 526
PART #: TCFKM526AB
Thule 5590E
Mounts to the available Roof Rack Kit, sold separately.
PART #: TCOES599
Thule Force 625 Roof Box
Mounts to the available Roof Rack Kit, sold separately. Dimensions: 213cm x 87cm x 43cm
PART #: TCBOX625
MOLLE Bags
Set of three. For Rubicon model variant vehicles only.
PART #: 82215429
Bedliner Kit
PART #: 82215845AB
Cargo Bed Storage System
Includes two sliding, weatherproof, waist-height lockable drawers. Rated at 90kg each. And heavy-duty tonneau cover as pictured (not included).
PART #: 82215594AB
Trail Rail System
Same as production option "ADH", includes back and side rails.
PART #: 82215956
Cargo Ramp (Aluminium) (Each)
Overseas model shown. Features a rubberised, non-slip tailgate protector, safety straps and hooks. Folds jack-knife-style for easy storage. Other accessories pictured sold separately.
PART #: 82211482
Towing Accessories
Tow Bar Package
Open up your adventure options with a genuine Tow Bar Kit. Designed, engineered and tested specifically for your Jeep Gladiator, the tow bar is rated to a maximum braked towing capacity of 2,721kg with a maximum tow ball down load of 273kg. Tow Bar Kit includes Tow Bar, Tow Ball, "D" Shackles and Trailer Wiring Harness. Tow Bar Kit is covered by your Jeep new vehicle warranty when fitted at vehicle purchase, thus ensuring many years of peace of mind motoring. Please consult your authorised Jeep dealer for further towing information. Overseas model shown.
PART #: LA215647AD
Jeep Genuine Accessories are not applicable to all vehicle models. Every effort has been made to ensure part numbers and recommended fitment times are correct and accurate at the time of publication but cannot be guaranteed. Speak to your Jeep Dealer to confirm accessory suitability for your vehicle and formalise a quotation including material and fitment charges. Jeep Australia reserves the right to change and/or discontinue any accessory without notice, including prices, colours, content and specifications. You should consider the mass of your accessories and how this will impact the loading of your vehicle to ensure it will not exceed gross vehicle mass limits.
Next Steps
Interested? Call Valley Jeep on 0351351888
-
Book a Test Drive
The best way to experience the Gladiator is with a test drive.
Book a Test Drive
-
Finance Calculator
We're here to help you with your car financing needs.
Calculate Repayments
-
Request A Brochure
Get the very latest brochure on the Gladiator.
Request A Brochure
-
Want to Know More?
Want to know more from the team at Valley Jeep? Get in touch with us!
Get in Touch
Content Pieces Rendering Time = 00:00:00.3197813